#Good temp for cpu stress test 6700k install#
#Good temp for cpu stress test 6700k windows 10#
#Good temp for cpu stress test 6700k Pc#

In that configuration it behaves like my original description with Prime95 at 4.2 GHz and IPDT at 4.0 GHz. Next I tried turning 'Sync all cores' back on. I think that makes sense since both programs are loading all 4 cores, and the setting seems to imply that it will only run at 4.2 GHz when only 1 core is active. With this configuration both IPDT and Prime95 run at 4.0 GHz. When I did this, the BIOS also changed another setting 'CPU core ratio' from 'Sync all cores' to '1 core ratio: 42 and 2-4 core ratio: 40'. I then tried disabling this setting in order to use the Intel default Turbo core ratio settings. The description of disabled is: Intel default Turbo core ratio settings. The description of enabled is: ASUS optimized core ratio Turbo settings. In my BIOS I noticed a setting called 'ASUS Multicore Enhancement' that is enabled by default. If I run Prime95 again after IPDT, then Prime95 also only runs at 4.0 GHz until I reboot the computer. Then when I run IPDT I see that all 4 cores are at 4.0 GHz. If I run Prime95 I see that all 4 cores are at 4.2 GHz. After doing that I still see the same behavior I described before. My BIOS settings were already default, but I reset them again and re-ran the tool.

#Good temp for cpu stress test 6700k windows 10#

I am using Microsoft Windows 10 Pro 64-bit Version 1511. Thank you for your continued help Alberto. MMX SSE - capabilities check complete. Prime Number Generation Test Passed!!!. Million Floating Points per Second, MFLOPS: 619.2 Processor Name: Intel(R) Core(TM) i7-6700K CPU 4.00GHz Is it unusual that IPDT is not running at 4.2 GHz?Įxpected: Greater than 1 degrees below maxĮxpected String Parts: As Defined in BrandString_LocalConfig.xmlĭetected: Intel(R) Core(TM) i7-6700K CPU 4.00GHz My understanding is that 4.2 GHz is the expected turbo clock speed. When I run IPDT my motherboard reports that the processor is at 4.0 GHz and the core voltage is much lower. When I run Prime95 my motherboard reports that the processor is at 4.2 GHz and the core voltage is significantly higher. I do notice some interesting differences in how the CPU behaves when running IPDT vs. It looks like IPDT runs much cooler and is reporting that everything passes. I have run the Intel Processor Diagnostic Tool.

#Good temp for cpu stress test 6700k install#

You will be able to install our tool from the following link, second option to the left, it does an overall test including a temperature test: Now, in regard to the image you gave us, that is a 3rd party tool, so it could have misreading, we have our own tool that we rely on, and if the processor passed the test of it then is because it is working fine.

#Good temp for cpu stress test 6700k Pc#

So, as long and the PC is not throttling, or getting freeze or going off by itself, the temperatures should be fine, and so is the processor. The risky temperatures are when it reaches 90☌ or 95☌, but when it does that the PC will go off by itself, because the processor has that feature included. In this case, even though as you mentioned before the t-case of the processor 64☌, that does not mean the temperature cannot get higher than that value, it can, and it is expected depending on the load of work, especially if you do an stress test. At this point I believe I have ruled out the cooling system and suspect the CPU.Ĭan you help me figure out what is wrong? After trying the second cooling system, I am still seeing nearly identical temperatures. I was still troubled by the high temperatures, so I decided to buy a different brand of water cooling system. In the end, they told me they believed the cooler was working normally. They helped me troubleshoot the cooler and I remounted the water block several times. I contacted the water cooler's technical support. I originally assumed the problem was due to my water cooling system. It is my understanding that for this processor, Tcase should be around 64 C, and that core/package temps of 80 C are abnormally high, given that the CPU is at stock settings and water cooled. all motherboard settings are default), when I run a stress test, I am seeing the CPU core temp jump almost instantly to 75 C and then increase over several minuets to 80 C. Motherboard: ASUS Z170-Deluxe (all settings are default)Ĭooler # 1: Swiftech H220 X2 240mm all in one water cooler.Ĭooler # 2: Corsair H115i 280mm all in one water cooler. Processor: Intel i7 6700K (stock settings)

I am in the process of building a computer, and I am having problems with high CPU temperatures under load.